Enable TCP/IP

NOTE: By default, TCP/IP is enabled. If TCP/IP has been disabled, TCP/IP must be enabled and configured at the printer Control Panel before you access CentreWare Internet Services (CWIS). See the Related Content for additional information.

1. Login to System Administrator mode on the Control Panel. See the Related Content for additional information.

2. Select Network Settings.

3. Select TCP/IP Settings.

4. Select TCP/IP Enablement.

5. Select Enable for IPv4 or IPv6 then select Close.

6. Logout of System Administrator mode. See the Related Content for additional information.

Related Content

• Configure a Static IP Address, Subnet Mask and Gateway Address

• Enable Hypertext Transfer Protocol (HTTP)

• Login or Logout of the System Administrator Mode From the Control Panel