Adjusting Lightness / Darkness

Making adjustments to any of the image quality controls should be done in small increments. Making large adjustments can create image quality problems. See About Lightness/Darkness Controls.

Adjust Lightness / Darkness

  1. In the Xerox Nuvera user interface, click the Copy button.
  2. Select the Basic tab.
  3. Move the slider right or left to increase or decrease (respectively) the amount of lightness/darkness.

TIP: It is best practices to proof a job when you make image quality adjustments.

About Toner Saver

TheToner Saver mode feature is intended to save toner costs, similar to draft mode.

NOTE: Toner Saver is designed to save toner, and can produce poor image quality and undesirable, light, or washed-out prints.