Gå till huvudinnehåll Klicka för att läsa vårt tillgänglighetsmeddelande eller kontakta oss om du har frågor om tillgänglighet.

Enable the HTTP Protocol

Article Id: x_WC6400_en-O5315 | Published: 2016-03-21

Product support for
  • WorkCentre™ 6400

NOTE: HTTP is enabled by default.

  1. Login to Tools as the System Administrator. See the Related Content for additional information.
  2. Select [Network Settings] on the Touch Screen.
  3. Select [Advanced Settings]. A warning message about making changes to the machine's network settings will be displayed.
  4. Read the message, and then select [Continue].
  5. Select [HTTP].
  6. Select [Enable].
  7. Select [Save].
  8. Select [Close].
  9. Press the [Log In / Out] button on the Control Panel.
  10. Select [Logout] on the Touch Screen.

Related content

Did this help?