Gå till huvudinnehåll Klicka för att läsa vårt tillgänglighetsmeddelande eller kontakta oss om du har frågor om tillgänglighet.

Login or Logout of Tools as the System Administrator

Article Id: x_WC6400_en-O2113 | Published: 2016-03-21

Product support for
  • WorkCentre™ 6400

NOTE: Many of the printer's configuration settings or options available on the Tools tab may be hidden or password protected if a System Administrator has set access to Restricted.

If the System Administrator has set access to Restricted, a System Administrator login and password to access these functions using an Internet browser to directly access the printer.

To login as the System Administrator:

  1. Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed.
  2. Enter the User Name, and then select [Next] on the Touch Screen.
  3. Enter the password, and then select [Enter].

    NOTE: The default user name is "admin" (case sensitive), and the default password is "1111". The password characters will be displayed as asterisks (*). If a number is mistakenly entered, press the [Clear (C)] button and then re-enter the password. To cancel the operation, select [Cancel].

    Contact the System Administrator if there is a problem with the password, or the password has been lost or forgotten. If the password cannot be recovered, a service call must be placed.

  4. Select the [Machine Status] button on the Control Panel. The Machine Status screen will be displayed.
  5. Select the [Tools] tab. The Tools screen will be displayed.

To logout as the System Administrator:

  1. Press the [Log In / Out] button on the Control Panel. An 'Are you sure you want to logout?' message will be displayed.
  2. Select the [Logout] button on the Touch Screen.

Did this help?