DocuWorks(TM) 6 Update 6.1 Release Notes

The Update software updates DocuWorks 6 (version 6.0.3). Installing Update will update to DocuWorks 6.1.

-	When displaying the list view of a document that contains a large number of pages, the latter pages may not appear on the list.(8110)
-	When importing folders to the Desk, DocuWorks Desk might crash by specifying a folder that has many folder layers in its directory path. This problem has been corrected.(9197)
-	When opening several DocuWorks Viewers on a computer that displays in 256 colors, CPU usage reached to 100%. This problem has been corrected.(9377)
-	In previous version of DocuWorks Desk, files were lost unless "Paste" was done immediately after "Cut" files. This problem has been corrected. The "Cut" files are sent to "Recycle bin".(11290)
-	The Desk might crash by closing Desk when space or unusable characters are used to rename a file in thumbnail view. This problem has been corrected.(12057)
-	In DocuWorks Viewer or Desk, a document with a file name over 32 bytes could not be printed via certain printing software. This problem has been corrected.(12065)
-	DocuWorks documents could not be opened when specifying the file by the relative path in the link annotation. This problem has been corrected.(12117)
-	When [Determine document name from OCR result] is selected, the file might not be imported by scanning. This problem has been corrected.(12165)
-	When converting the application document into a DocuWorks file in Microsoft^® Windows^® 2000 or Windows^® XP, part of the Thai characters became unreadable. This problem has been corrected. (12175)
-	When renaming a folder in the folder area of Desk, a space was allowed to be entered both in front and last of the folder name. This problem has been corrected.(12201,12526)
-	Some pages that have not been OCR processed might have "OCR Processed" on the Desk status bar by binding OCR processed DocuWorks document and newly created document. This problem has been corrected.(12233)
-	When [Fit to Standard Size Paper] was selected without enabling [If scanned image exceeds A3 size, fit into A3] in [Scan and Import] tab in [DocuWorks Desk Options], the scanned image was divided into several pages when scanning and importing a sheet that exceeds A3 size and the last of such pages was not displayed properly. This problem has been corrected.(12314)
-	The message to confirm save was displayed when you opened the documents that had been OCR processed with non-Japanese version of DocuWorks, displayed the OCR result and then closed in the DocuWorks Viewer in Japanese OS. This problem has been corrected.(12326)
-	When a DocuWorks document containing charts had been OCR processed and the OCR result was converted into CSV, some of the cells disappeared in the CSV file. This problem has been corrected.(12331)
-	[Server Busy] dialog box was displayed after a certain period of time from the start of some processes such as copying files on Desk. This box is no longer displayed.(12332)
-	When a document was added to the link definition folder, the scrolling speed might be extremely slow in the workspace in DocuWorks Desk link folder. This problem has been corrected.(12342)
-	The destination to save original data was specified to the Windows desktop every time. This problem has been corrected.(12367)
-	Thumbnail views were made available for the JBIG compressed TIFF files on Desk.(12368)
-	When selecting [Correct skew of images automatically] in [Process Pages] plug-in, the margins might appear in black. This problem has been corrected.(12426)
-	Is was made not possible to rename files with the name starting with "." (period) to match the Windows specifications.(12436)
-	When copying and pasting a folder from link folders to subfolders, the copy was repeated over and over. This problem has been corrected.(12437)
-	DocuWorks documents were not created from certain JPEG files. This problem has been corrected.(12440)
-	When the signature by digital certificate was added with received stamp view, the characters were garbled in some PC environment. This problem has been corrected.(12441)
-	When converting the application document into a DocuWorks file in Microsoft^® Windows^® 2000 or Windows^® XP, part of the Thai characters were converted into graphics. This problem has been corrected.(12450)
-	In Microsoft^® Internet Explorer, DocuWorks files could not be opened on FTP sites that did not use the default port. This problem has been corrected.(12462)
-	[Rotated by 90 degrees right] button has been added to the Viewer Control standard tool bar.(12474)
-	When the folder to be opened during startup had been set to [Opened folder when exit] in DocuWorks Desk settings, the Desk might crash by dropping a file on a folder icon in the work space immediately after starting DocuWorks Desk. This problem has been corrected.(12487)
-	USER object might cause leakage when converting a document of an application into DocuWorks document. This problem has been corrected.(12489)
-	When DocuWorks Desk was in list view and a new document was added to the current directory while editing the file name, the focus moved to the added document. This problem has been corrected.(12524)
-	In [Image Converter] plug-in, [Priority on compression rate], [Normal] and [Priority on image quality] might not be enabled although these options had been selected when converting files into JPEG. This problem has been corrected.(12542)
-	In renaming a folder in Desk, the folder that you tried to change first was renamed though you wanted to rename a different folder after the error message "The name is invalid" had appeared. This problem has been corrected.(12560)
-	The drawings were not updated when calling up SetSheafViewMode/SetCharDrawAdvance method in ViewerControl. This problem has been corrected.(12594)
-	In Viewer Control, the message that appears when specifying a file that is not exist for LoadFile method was amended.(12595)
-	When the Viewer Control set to edit file mode, the application might crash after calling up CloseFile method. This problem has been corrected.(12626)
-	When a file had been dragged-and-dropped from the workspace in the Desk to a folder followed by subfolders in the folder area, a tree view opened 3 seconds later. This problem has been corrected.(12627)
-	When the path length of the link target in the link annotation is 260 bytes or more, the application might crash by operating such link annotation. This problem has been corrected.(12633)
-	When pasting a DocuWorks document after failing to cut it in [List View] in Desk, an error message might appear and end up in failure. This problem has been corrected.(12667)

Read the following notes carefully before installing Update.

Update must be installed on a computer with DocuWorks 6 (version 6.0.3) already installed.

Most files on the Setup disk are stored in compressed format and therefore cannot be used as they are. You must run the Setup program (Setup.exe) to install the software.

Before you begin installation, be sure to exit all running applications.

If you abort the Setup program midway through the installation, DocuWorks will not work. You must install the software again.

If a file copy error occurs, try the following actions to resolve.

a.	The destination directory or file is write-protected. Use a different directory or remove the write protection.
b.	The original file of installation cannot be read. Use a correct setup disk.

After the installation, do not change the structure of program files' directory or move files, otherwise DocuWorks may fail to run.

To install DocuWorks in Microsoft^® Windows^® 2000 or Windows^® XP, you need privileges equal to those of Administrators.

If an older version of DocuWorks Viewer Light for Web is already installed on your PC, install DocuWorks Viewer Light for Web 6.1 by overwriting the older one.

You cannot create an installation folder, a temporary file folder, or a DocuWorks Desk folder in the following locations. Doing so will prevent DocuWorks from working normally.

-	Immediately under the drive, such as under "C:\"
-	Removable media such as CD-R/W, MO, or memory card

If restart is required after installation, be sure to log on as a user with Administrator-level privileges. Installation may not be successfully completed unless you log onto DocuWorks after restart.

1.	Double-click on "setup.exe" from the directory created when the file extracted. Installation starts.
2.	Click [Next]. The [License Agreement] dialog box appears.
3.	Verify the information displayed in the license agreement. Select [I accept terms in the license agreement], then click [Next]. A confirmation message appears asking whether you want to start installation.
4.	Click [Yes]. Installation starts. When installation is complete, the [Setup Completed] dialog box appears.
5.	Click [OK]. If you are prompted to restart your PC before using DocuWorks in Step 4, be sure to restart your PC.

You can check the updated version number for DocuWorks Desk or Viewer by selecting [About] from the [Help] menu. The displayed name of the version number after installing Update is as follows.

-	DocuWorks Desk: Version 6.1.0
-	DocuWorks Viewer: Version 6.1.0

-	Update is provided for customers with DocuWorks 6 (version 6.0.3). It will not update other version of DocuWorks.

SOFTWARE LICENSE AGREEMENT

1. Grant of License

In accordance with the terms and conditions of this Software License Agreement ("the Agreement"), Xerox Canada Ltd. ("Xerox") grants you ("Customer") a non-assignable, non-transferable and nonexclusive license to use the DocuWorks 6 Update - 6.1 NA software which consists of program and related documentation ("the Software"), on Customer's computer in Canada which has DocuWorks 6.0 installed.

2. Rights of Software

All intellectual properties including but not limited to copyrights of the Software are retained by Xerox and/or its suppliers.

3. No Warranty

THE SOFTWARE IS PROVIDED ON "AS IS" BASIS. XEROX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AS TO MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL XEROX BE LIABLE TO CUSTOMER FOR ANY CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES, INCLUDING ANY LOST PROFITS OR LOST SAVING, EVEN IF XEROX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY THIRD PARTY.

4. Restrictions

Customer shall not do the following acts:

(a)	Use or copy the Software except as expressly permitted herein;
(b)	Modify, translate, reverse engineer, decompile or disassemble the Software;
(c)	Assign, rent or sublicense the Software to any third party;
(d)	Delete or alter copyright, trademark and other intellectual property notices on or in the Software.
(e)	Use font software except as permitted by font software licensors.

5. Termination

(1)	License to use the Software will be automatically terminated in case that Customer fails to comply with any of the terms and conditions in this Agreement.
(2)	Upon termination of license to use the Software, Customer shall immediately expunge or destroy the Software.

6. Other Provisions

(1)	This agreement is governed by the laws of Canada and the laws of the Province of Ontario.
(2)	If any part of this Agreement is found void and unenforceable, it will not affect the validity of the Agreement, which shall remain valid and enforceable according to its terms.

All intangible assets including copyright of this software and its backups belong to Fuji Xerox and its licenser.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
All trademarks noted in this document are the properties of their respective owners. Contents of this file are subject to change without prior notice.