32-Bit-PS-Treiber für Windows XP/Server 2003 - WHQL-zertifiziert.
32-Bit-PS-Treiber für Windows Vista - kompatibel.
32-Bit-PS-Treiber für Windows Server 2008 - kompatibel.

Der kostenlose Xerox Global Print Driver dient zur Verwaltung von Xerox-Druckern und Druckern anderer Hersteller im Netzwerk über eine einzige, intuitive Oberfläche. Er bietet IT-Managern eine erhebliche Erleichterung bei der Verwaltung von Druckern im Unternehmen, da zum Hinzufügen und Aktualisieren von Druckern kein Treiberwechsel erforderlich ist.

The latest drivers will always be located on your up to date DFE.

windows and mac drivers, all languages.

32-Bit-PCL-Treiber für Windows XP/Server 2003 - WHQL-zertifiziert.
32-Bit-PCL-Treiber für Windows Vista - kompatibel.
32-Bit-PCL-Treiber für Windows Server 2008 - kompatibel.
32-Bit-PCL-Treiber für Windows 7 - kompatibel.

Windows XP/Server 2003 32-bit PCL driver - WHQL Certified.
Windows Vista 32-bit PCL driver - Compatible.
Windows Server 2008 32-bit PCL driver - Compatible.
Windows 2000 32-bit PCL driver - Digitally Signed.

Windows XP/Server 2003 32-bit PS driver - WHQL Certified.
Windows Vista 32-bit PS driver - Compatible.
Windows Server 2008 32-bit PS driver - Compatible.
Windows 2000 32-bit PS driver - Digitally Signed.

Windows Generic PPD.

Windows PCL6 Print Driver and PPD for EX700 v1.0 SP1 with Xerox 700 Digital Color Press

Windows PostScript Print Driver and PPD for EX700 v1.0 SP1 with Xerox 700 Digital Color Press

This patch is only for the Creo print server version CX700i v2.0.
Problem Description: The following XPIF attributes are not mapped when they are sent via an XPIF ticket from FreeFlow suite applications.

This patch is only for the Creo print server version CX700i v2.0.
Problem Description: A constraint message does not appear when a job is sent to the High Capacity Stacker/Top Tray and GBC Punch is selected with an illegal paper size.

This patch is only for the Creo print server version CX700i v2.0.
Problem Description: When you select the Use Embedded ICC Profile checkbox in the Color tab and then process the file, the RTP file is corrupt.

This patch is only for the Creo print server version CX700i v2.0.
Problem description: Printouts of the profiling charts are damaged because the ink limiting value is too high.

This patch is only for the Creo print server version CX700i v2.0.
Problem description In some instances, the CX print server recognizes an incorrect paper size loaded in Tray 5.

This patch has become a prerequisite for many other patches. Fixes SPAR - 147986668 - Tabs Jamming in the fuser area and fault 077-909 occurs after upgrading to CX700 version 1.5Enable tabs printing using internal trays. Paper stock icons don’t appear for all paper types. Problem in pulling tab from Tray 5 when using the Page Exception Mode.

Problem Description: After selecting the Chinese language in the Preferences window, in the Localization area, the Print Driver software appears in English. Prerequisites Common_Patch_01 Chinese_VP_Patch

Problem: Creo CX700 version 1.5 virtual printers disappeared after switch GUI localization to Chinese.

Problem: When you select the Manual duplex print method for a job with a media weight of 300 gsm, the job fails and appears in the Storage area.

Overview When you select the Saddle Stitch imposition method (Job parameters > Imposition method), and then select number of sets, the default gutter is set to 10 mm. This value is transparent to the user and cannot be changed. You are unable to print two sets of a smaller size paper on one larger sheet as the gutter size is too large. For example—you cannot print two sets of an A5 document on one A3 size paper.

When this patch is not installed even if the job is in black & white the 1st BTR's of the color stations CMY in the IOT are not retracted in B & W mode and the machine will keep the process control as it is in a full color job. This leads to low toner in the developer tanks later when the customer is printing full color jobs afterwards. When this patch is installed, if grayscale or Black & White jobs are sent the color stations CMY in the IOT are not retracted, it prints in k-only mode. The switch to the k-only mode or Color mode is automatic depending on the job sent.

1. When pressing the sample button on the HCS the sample sheets number is as expected but when the jobs completes, it do not leaves the print queue, the status bar don’t clears from the DFE and remains at 98%. 2. The finished job in stacker is missing sheets. When this patch is installed. It fixes issues 1 and 2

Version 3.0.2 can be installed on any version 3.0 or higher.
Contains fixed for some problems found with v 3.0.1. See the release notes for details