After downloading the Macintosh print driver from the Xerox web site at
www.xerox.com, follow these steps for a successful installation.*

1. Make
certain your printer is plugged in and your USB cable is connected.  See
the Getting Started Guide for more information on printer setup.

2. Double
click the DocuPrint M750/M760 installer.

3. Select Install, to install the
print driver. 

4. After the driver is installed, select Quit to finish
installation.

5. Select the Chooser in your Apple Menu, located in the
upper left hand corner of your screen. In the Chooser window, click on the
Xerox DocuPrint M750/M760 icon and then close the chooser window.

6. After
installing your driver, print an alignment test page to optimize print
quality. To print an alignment test page, open any document and then
select: File-> Print-> Utility-> Alignment. Follow the on-screen
instructions to complete the alignment procedure and printer installation.


You are now ready to print to your DocuPrint M750/M760 from your Macintosh.  




*In order to print from your Macintosh to the DocuPrint M750/M760,
you must be running OS 8.1 or higher (excluding OS X) and have a USB
enabled Macintosh.