Den gratis globale printdriver fra Xerox styrer alle Xerox- og ikke-Xerox-printere på netværket med en enkel, brugervenlig grænseflade. Den gør det markant mere enkelt for IT-chefer at håndtere printerstyring, da det er nemt at tilføje og opdatere printere uden at ændre drivere.

This patch contains PostScript Driver for Windows that will fix the following issues.
1. Output profile disappears after changing setting in the Basic tab when printing from Acrobat.
2. PostScript driver locks up while installing via TCP/IP or LPR.
3. Bidi communication fails if installed more than once on the same client.

Windows based print drivers for external EFI controller for DC242/252/260 product. Includes PostScript and PCL drivers plus 64-bit PostScript drivers. (64-bit PCL drivers are not available at this time)

PPD file for use when printing to Spire CX260 and DocuColor 242/252/260.

Multi language file. If you only need the drivers in English, please download the English only version. It will be a much smaller file.

Contains both PCL and Postscript print drivers for Windows.

Please use this version instead of the latest, 4.6.0.34 if you need to use the image shift feature of CWS.

Printer drivers and utility software is stored on the DC242/252/260 and EX242/252/260 and it may be downloaded from the web pages of these machines. Software for both Windows (2000, XP and Vista) and Macintosh (OS 10.4 and lower) is available.

ICC Color Profiles for Windows and ICM Color Profiles for Macintosh computers.

Print Driver, Remote Scan, Remote Desktop Connection, Eye One, POD check tool and other utilites for Windows based computers.

Utility that will remove all remenants of Command WorkStation version 4.x from the Windows XP, Windows 2000 registry.

PREREQUISITES = ProdID, 1-1U8E58, 1-18SMZM, 1-1E21N4, 1-13LK3J, and 1-19AZVM. Install this patch and reboot the server per the included instructions before applying any further patches. . Must be installed prior to Composite #4 (1-1H1YIQ).
Fiery patch to address: A Job Submission Error occurs when mixed media job with custom media type stocks is submitted through FreeFlow Makeready Application.

PREREQUISITES = ProdID, 1-1U8E58, 1-18SMZM, 1-1E21N4, and 1-13LK3J. Install this patch and reboot the server per the included instructions before applying any further patches. . Must be installed prior to Composite #4 (1-1H1YIQ).
Fiery patch to address: Job ticket media type displays incorrect information when printing to the Fiery from FreeFlow MakeReady.

CX250 v2.0 SP2 contains fixes for the Spire software. Please see release notes for more detailed information. (Included with the patch file)

Prerequsite: Your system must be at version EX260 v2.0 with patches 1-VTO62 and 1-XMDF0 prior to installing this software.
Jobs submitted with custom Impose template and Hot Folder RIPs using scale to fit and not 100%.

This patch is only necessary if patch 1-ZKLVP was installed.
Fiery server does not boot to idle after patch 1-ZKLVP was installed.

Prerequisite: RPX-ii v2.0 or later. ***Version 2.0.6 may be installed over any RPX-ii release version 2.0 or later. It is not necessary to install any other updates before installing v2.0.6***
Contains fixes for issues discovered with previous releases. Please see the release notes for details and installation instructions.

This patch in only for EX260 v 2.0.
1-XMDF0 loaded via system updates causes the system update log to be deleted. This patch is only for the following conditions: A. The System Update Log is missing when you print a Configuration Page. B. In the System Update screen, there is a message of No Patches Installed and the History screen is blank.

Prerequisite(s): Your EX260 must be at v2.0 with patch 1-VTO62 prior to installing this software.This patch does NOT include the following patches: 1-VTO62, 1-WUBU9, any FreeFlow enablement patches, any patches released after 16-June-2008.
This is a cumulative patch that has been issued to address several fixes for the EX260 v2.0 color server. Please see the release notes / customer letter for details. NOTE : This patch supersedes the following patches: 1-W3DS2, 1-VBYZ2, 1-XMDEU, 1-XDJ75, 1-X4RRL, 1-X6BXX, and 1-XHT21.

Prerequisite(s): Your EX260 must be at v2.0 with patches 1-VTO62 and 1-XMDF0 prior to installing this software.
This patch contains multiple fixes. Please see the release notes for details.

Prerequsite: 1-VT062 must be installed.
Contains fixes for the following issues: 1. Some text prints w/ partial erasure of characters on pre-imposed A3 PDF. 2. Fonts are missing after a job is printed. 3. Imported PDF prints black lines as white.

PREREQUSITE: Your system must be at version EX260 v2.0 with patch 1-VTO62 prior to installing this software. For DocuColor 242/242/260 with Standalone Fiery controller.
This patch will fix two issues: 1. Job will not print from tray 5 if different paper size needs to be loaded in Tray 5. 2. Unable to print on "Registermaterial1 A4" (A4 Cover LEF, Tab Stock) using Paper Catalog.

Prerequisite(s): CX260 v2.0 SP1 and ATS Firmware 121018 Patch 22-Nov-2007
Fixes a false Tray 6 out of place message after sleep mode.

Fixes the issue of Adobe Acrobat 8 cannot be updated if the application is installed on the Fiery server. This patch is for the DocuColor 242/252/260 with the EX260 v 2.0 (External Fiery Controller)

Patch to fix the issue of a virtual printer, with impositon, produces blank output with Adobe Acrobat Professional 8 on Mac-Intel.

Patch to fix known issues with the EX260 controller. See the release notes for more details and installation instructions.

Prerequsite: CX260 V2.0-SP1
The ATS-firmware patch for CX260v20-SP1 will fix the following issues: -DC260/252/242 Auto tray switching problems - Support for new Firmware 1.210.14 and 18.

ICC profiles.