German Printer Driver for Splash G640

German Printer Driver for Windows XP

German Printer Driver for Windows 2000/XP

German Printer Driver for Windows XP

German Printer Driver for Windows XP

German Printer Driver for Windows XP

German Printer Driver for Windows XP

German Printer Driver for Windows XP

German Printer Driver for Windows XP

Fiery X12e Remote Scan for windows.

Fiery EX12 v2.0 SP2 Remote Scan for Windows.

Fiery X12 v1.5 TWAIN plug-in

TWAIN FieryScan

Fiery Remote Scan v4.4 for the Fiery EX12 v2.0

The MPS Server does not contain WinZip. This is a self extracting file which will automatically load when opened.All programs and files are copied to c:/WINNT/Temp/~WZS0xxx.tmp folder. It is suggested that you move this folder to the desktop and rename it MPS3.1 CD Files. You can then point to it if ever CD files are needed.
MPS v3.1 Upgrade Software

This will upgrade the Imation software to v2.03

Adds fixes for various problems printing from Quark 7.01

The Update file will update ColorCal to make it compatible with the Epson 2480 Scanner.

Please read and understand all documentation and installation instructions before installing these patches
2007 Time zone update for Microsoft Windows operationg systems (KB928388)

2007 Time Zone update

Please read the "Release Notes" for installation instructions
See attached Release Notes for new bugs fixed

PDF files print with unexpected color artifacts (ie noticeable green shading in neutral color)

This patch fixes Greyscale images printing light when Greyscale is selected in the driver after installing service pack 2 (SP2).

Please read the "Release Note" before installing.
Receive conflict message with Mac OS 9 job when using Freeform with FACI installed

Please read the "Release Note" for installation instructions.

When printing 2 copies of PS Test Page, X12 displays "Ready within 1 minute" in between jobs, and engine cycles down.

Addresses the following issue: 1. Job not stopping when stacker is full.

Adds fixes for various problems printing from Acrobat 6 on Mac OS X

Using PowerPoint 2000, text and box created with the same color prints different colors.

Please read the "Release Note" for installation instructions.
See attached Release Notes for new bugs fixed

Addresses the following issue:
1. Unable to print with Printing Group from Mac OS X with Job Notes driver.

Please read the "Release Note" for installation instructions.
See attached Release Notes for new bugs fixed.

Please read and understand all documentation and installation instructions before installing these patches.
This patch is a print server service that keeps the system software on your print server up-to-date with the latest Microsoft security updates. It contains patches 1-H2301 and 1-E4VH1 and all documentation and installation instructions for both patches.

Please read and understand all documentation and installation instructions before installing this patch
This patch is a print server service that keeps the system software on your print server up-to-date with the latest Microsoft security updates.

Please read and understand all documentation and installation instructions before installing these patches.
This patch enables Remote Desktop on the Microsoft XPe System

Addresses the following issue:
1. Exporting job log from Web Spooler will have the color column be all 0 for all jobs.

Addresses the following issue:
1. Blue text printing Purple
2. Part of background missing when printing from InDesign CS

Please read the "Release Note" for installation instructions.
Included components are:
- Native OS X Appletalk Spooling
- Native LPR Spooling
- Native, unified file converter with support for CT-NLW files
- PDF 1.5

Addresses the following issue:
1. Lines missing with imported objects after calibration.

This patch requires and was tested with Composite patch 1-8C6Z7 pre-installed
Addresses the following issue:
1. The output is no longer collated when downloading a PDF file.

Addresses the following issue:
1. Font spacing is incorrect when imposing a PDF document.

Addresses the following issue:
1. The DC12 goes into dead cycle with cover page on when printing multiple jobs.

Service pack 5 must be installed for this patch to work properly.
Addresses the following issue:
1. This patch provides a way to make the 2up feature not rotate the second copy of the page.

Service pack 5 must be installed for this patch to work properly.
Addresses the following issue:
1. Over long runs, the color on side 2 would change noticeably when printing Heavyweight or Extra Heavyweight duplex jobs via Tray 5. With this patch, the color on side 2 is stable over long runs.

Service Pack 5 for Splash G630 v3.0 or Splash G620 v2.5.

You will need to update your print drivers on all workstations using the composite patch driver. This patch is for the Fiery X12 version 1.5 only.
This download includes Patch #1-77IXH and Patch # 1-6HW61.

Addresses the following issue:
1. After a large number of prints, the XP12 abruptly starts printing all jobs as a single yellow separation.

The MPS server does not contain WINZIP so the file will need to be unzipped on a PC and then brought over to the MPS server.
Addresses the following issue:
1. Receiving error “PostScript undefined OffendingCommand:" when printing from 3rd party Graphics Software on Mac OS X 10.3.

KPG MPS HotFix v3.1.1

This patch was tested and approved on a system with X12 1.5 Composite Patch (1-77IXH & 1-6HW61). These patches should be loaded prior to installing this new patch (1-9IAYO).
Addresses the following issue:
1. Custom paper size fails to print from bypass tray from Quark 5.0 on Mac OS 9.2 client.

Please read the "Release Note" before installing.
Addresses the following issue:
1. After a large number of prints, the EX12 abruptly starts printing all jobs as a single yellow separation.

The Update file will Update ColorCal to make it compatible with the Epson Perfection 1670 scanner. This file also includes the driver for the Epson 1670 scanner.

The Update File will Update ColorCal to make it compatible with the Epson Perfection 1670 scanner. This file also includes the driver for the Epson 1670 scanner.

Addresses the following issue:
1. Tabloid paper size document showing up as Letter Paper size in Job Log when Cover Page is enabled.

The MPS server does not contain WINZIP so the file will need to be unzipped on a PC and then brought over to the MPS server.
Addresses the following issue:
1. Receiving error “PostScript undefined OffendingCommand:" when printing from 3rd party Graphics Software on Mac OS X 10.3.

Must be running software version XP12 1.1 SP1 before loading this patch.
Addresses the following issue:
1. Addresses the ability to have another alternative method to configure NDS PServer on the Fiery XP12 SP1 Print Server.

This patch was tested and approved on a system with X12 1.5 Composite Patch (1-77IXH & 1-6HW61). These patches should be loaded prior to installing this new patch (1-9IAY7).
Addresses the following issue:
1. Receive error "ERROR:invalidaccess; OFFENDING COMMAND: length" when downloading PS file to Fiery X12.

This patch requires that the XP12 have the SP1 and the composite patch 1-8C6Z7 pre-installed.
Addresses the following issues:
1. The Fiery XP12 will hang or cause a paper jam when printing more than one print of a complex file.
2. Unable to print multiple copies when printing from Mac OS 9.x connected to the Direct Queue.

This patch requires that the XP12 have the SP1 and the composite patch 1-8C6Z7 pre-installed.
Addresses the following issues:
1. When printing Separations from the application, a page is printed out with the following message: "Some spot separations may not have been printed. To print the spot colors, please upgrade the server with the Graphic Arts Package".

Please unzip and read the "Release Note" before installing...
Addresses the following issues:
1. Receive an “Invalid separation name in overprint selection” error.
2. Receive a print that a Graphic Arts Package is needed to print spot color separations.

This patch was tested and approved on a system with X12 1.5 Composite Patch (1-77IXH & 1-6HW61). These patches should be loaded prior to installing this new patch (1-82UBN). If 1-77IXH & 1-6HW61 is loaded on the Fiery X12 server, please be sure that this patch (1-82UBN) is loaded afterwards.
Addresses the following issues:
1.TIFF file from PhotoShop will receive errors or blank pages with PS code, when created into a PS file to Download to Fiery X12.
2.Color text missing when printing with PCL driver on Windows NT client.

This patch requires and was tested with X12 1.5 Composite Patch (1-77IXH & 1-6HW61) pre-installed.
Addresses the following issue:
1. Scan backs are too light after Composite Patch is loaded.

Please read the "Release Note" before installing.
Addresses the following issue:
1. The Fiery EX12 will hang up or cause a paper jam when printing more than one print of a complex file.

Please read the "Release Note" before installing.
Addresses the following issue:
1. Only one copy is printed when printing from a Macintosh to Direct Queue specifying multiple copies.

The update file will update the G640 Server to scan accurately with the Epson 1260 and 1660. Scanning will already physically work with the 1260 and 1660, but this update is necessary to ensure full color accuracy for these models.

Addresses the following issue:
1. When Fiery X12 is Rebooted or Restarted, jobs that have previously printed will begin to print again.

Please read the "Release Note" before installing.
Addresses the following issue:
1. Manual duplexing fails when multiple copies are requested, the EX12 will request to add the second side after each set.

This patch was tested and approved on a system with X12 1.5 Composite Patch (1-77IXH & 1-6HW61). These patches should be loaded prior to installing this new patch (1-7ZLKZ). If 1-77IXH & 1-6HW61 is loaded on the Fiery X12 server, please be sure that this patch (1-7ZLKZ) is loaded afterwards.
Addresses the following issue:
1. The copier goes into a cycle mode or a paper jam occurs when printing large duplex documents.

Be sure to have this patch loaded after 1-6HW61 (Composite Patch). If 1-6HW61 is loaded after this patch, please load 1-5R3CP again. You do not need 1-6HW61 loaded in order for this patch to work.
Addresses the following problem:
1. Output from Quark Express will print several pages of indecipherable code.

This patch can be loaded with or without the X12 1.5 Composite Patch (1-6HW61). If 1-6HW61 is loaded on the Fiery X12 server, please be sure that this patch (1-7K5V9-1) is loaded afterwards.
Addresses the following issue:
1. The Fiery X12 v1.5 abruptly starts printing all jobs as a single yellow separation after a large number of prints.

Please read the "Release Note" before installing.
Fiery EX12 v2.0 Composite patch

Addresses the following issue:
1. Color problems reported when using the Epson scanner.

Please read the "Release Note" before installing.
Addresses the following issue:
1. System that may allow unauthorized access, denial of service or cause unstable behavior if SNMP services are implemented.

Addresses the following issue:
1. Not able to calibrate(perform a white reference check) with certain Spectrocams through the Matchprint Professional Server (MPS) software.

Must be running software version XP12 1.1 SP1 before loading this patch.
Addresses the following issues:
1. After upgrading to XP12 SP1.1, Freeform lost functionality on NON-FACI systems.
2. After a large number of prints, the XP12 abruptly starts printing all jobs as single yellow separation.

The versions of ColorCal which are installed should only be used with the EPSON Perfection scanner, not with a UMAX 2100U, 1220S, or 610S.
The file contains installers which update ColorCal to make it compatible with the EPSON Perfection scanner. The versions of ColorCal which are installed should only be used with the EPSON Perfection scanner, not with a UMAX 2100U, 1220S, or 610S.

Always print a configuration page for the Fiery server prior to installing any software.
Bios update patch from 1.41 to 1.42 500mhz to 600mhz support

Do not use for G620 v2.5 or G630 v3.0.
Service Pack 8 download for Splash G620 Ver 2.0 server.

NT Service Pack 6a (1-ANKZ9) is required to be installed before installation of 1-EMOAI. Please see release notes that are inluded with zip file.
Microsoft Security Critical Hot fix for Fiery Servers running NT Operating System.

Fiery units without FACI will continue to receive Security Hot Fixes from EFI in postscript downloadable format. EFI will ONLY support Microsoft downloads of the Critical Security Hot Fixes. Not recommended for Dial-up connections. 56K connection will take approximately 2 hours
Microsoft Security Critical Hot Fix Updates for EX12 v2.0, X12 v1.5, XP12 v1.1 SP1 & X40 v1.0

ICM Profiles

ICM Profiles

ICM Profiles

ColorSync Profiles

ColorSync Profiles