Pređi na glavni sadržaj Click to view our Accessibility Statement or contact us with accessibility-related questions.

Enable, Disable, or Modify the CentreWare Internet Services (CWIS) Administrator Login

Article Id: x_6600_en-O7026 | Published: 22. 1. 2016.

Product support for
  • WorkCentre™ 6605

CAUTION: If the CWIS login username or password is lost or forgotten, contact Support to place a Service call.

To Enable or Disable Administrator Login:

IMPORTANT: By default, the Administrator login is disabled. If required, enable the Administrator login username and password.

When login is enabled:

  • The username and password are unique, there is not a default assigned by the printer.
  • To access CWIS Properties and modify settings the Administrator user must login.
  1. Access CentreWare Internet Services (CWIS). See the Related Content section for additional information. The CentreWare Internet Services window will be displayed.
  2. Click on the [Properties] link.
  3. If prompted to login, enter the required username and password.
  4. Scroll down to the Security heading on the left window pane.
  5. Click on [Administrator Security Settings].
  6. Select one of the following, depending on the requirement:
    • Enable (require) login:
      1. Add a check mark to the [Enable Administrator Mode] check box.
      2. Proceed to the step 6 below for the username and password settings.
    • Disable login:
      1. Remove the check mark in the [Enable Administrator Mode] check box.
      2. Click [Save Changes] to save the current selections.

To Assign or Modify the Administrator Login:

  1. Access CentreWare Internet Services (CWIS). See the Related Content section for additional information. The CentreWare Internet Services window will be displayed.
  2. Click on the [Properties] link.
  3. If prompted to login, enter the current required username and password.
  4. Scroll down to the Security heading on the left window pane.
  5. Click on [Administrator Security Settings].
  6. Select one or both of the following, depending on the requirement:
    • Enter a name in the Username field.
    • Enter a password in the Password, and then re-enter the password in the Verify Password field.
  7. Click [Save Changes] to save the current selections.

Related content

Did this help?