Configure the Proxy Server for Remote Services

Article Id: 1382665.html | Published: 07.03.2017

Product support for
  • Xerox Versant 2100 Press
  • Xerox Versant 80 Press
  • Xerox Versant 180 Press
  • Xerox Versant 3100 Press

From the CentreWare Internet Services main screen, select the Properties tab. In the Properties panel shown at the left of the screen, select General Setup and SMart eSolutions Setup.

Use this area for configuring or enabling the proxy server setup for Remote Services. You can also set up email notification addresses and view the meter read and supplies data that was last sent to Xerox. Use Maintenance Assistant to immediately transmit system data to Xerox for diagnostic support.

You can disable or enable Xerox Remote Print Services through the CentreWare Internet Services web page only; not at the press Control Panel. The settings you select will apply and be visible on the press.

Configure the Proxy Server for Remote Services

  1. From Smart eSolutions Setup, select Proxy Server.
  2. In the General area of the Proxy Server window, make sure the Use Proxy Server Enabled checkbox is selected.
  3. Contact your network administrator for the correct Proxy Setup option to select, the Addresses to Bypass Proxy Server, the HTTP (or HTTPS) Server port number and name, and whether Authentication should be enabled.
  4. Select Apply to save the settings.

Communication Status

From SMart eSolutions Setup, select Communication Status.

The Configuration Mode for SMart eSolutions (Remote Services) is Enabled as the default for the press and the last transmission date of meter reads or supplies data is shown.

Email Notification

From SMart eSolutions Setup, select E-mail Notification.

In the Email Addresses text field, enter the email addresses of the system administrators who need to receive notification of when data was transmitted through SMart eSolutions. Select when you want notification emails to be sent and select Apply to save the settings.

Did this help?