Log in to the Printer's Control Panel or Embedded Web Server as a System Administrator
- Product support for
- VersaLink B7125/B7130/B7135 Multifunction Printer
- Article ID
- KB0130226
- Published
- 2021-10-28
The control panel consists of a touch screen and buttons you press to control the functions available on the printer. To access the administration and configuration settings at the control panel, log in as administrator, then touch the Device button.
The Embedded Web Server is the administration and configuration software installed on the printer. It allows you to configure and administer the printer from a Web browser. To access the administration and configuration settings, open a Web browser. In the address field of the browser, type the IP address for the printer. When the Embedded Web Server appears, log in as administrator.
Accessing the Control Panel as a System Administrator
At the printer control panel, press the Log In button.
Touch admin.
Type the administrator password, then touch OK.
Note: Depending on when the device was manufactured or the software version installed, the default password may be the device serial number or 1111.
Accessing the Embedded Web Server as a System Administrator
Before you begin:
Use the Configuration report to locate your printer IP address.
Ensure that your printer is connected to a network.
To log in to the Embedded Web Server as the administrator:
At your computer, open a Web browser.
In the Address field, type the IP address of the printer, then press Enter or Return.
In the top right area of the page, click Log In.
For User Accounts, click or type admin.
For Password Required, type the administrator password.
Note: Depending on when the device was manufactured or the software version installed, the default password may be the device serial number or 1111.Click Log In.