דלגו לתוכן הראשי לקריאת ההצהרה שלנו בנושא נגישות האתר או ליצירת קשר בשאלות בנושא נגישות האתר, יש ללחוץ כאן.

Enable TCP/IP

Article Id: x_wc5955_en-O3124 | Published: 03/02/2017

Product support for
  • WorkCentre® 5945/5955

NOTE: By default, TCP/IP is enabled. If TCP/IP has been disabled, TCP/IP must be enabled and configured at the printer Control Panel before you access CentreWare Internet Services (CWIS). See the Related Content for additional information.

  1. Login to System Administrator mode on the Control Panel. See the Related Content for additional information.
  2. Select Network Settings.
  3. Select TCP/IP Settings.
  4. Select TCP/IP Enablement.
  5. Select Enable for IPv4 or IPv6 then select Close.
  6. Logout of System Administrator mode. See the Related Content for additional information.

Related content

Did this help?