דלגו לתוכן הראשי לקריאת ההצהרה שלנו בנושא נגישות האתר או ליצירת קשר בשאלות בנושא נגישות האתר, יש ללחוץ כאן.

Enable Hypertext Transfer Protocol (HTTP)

Article Id: x_wc5955_en-O2739 | Published: 03/02/2017

Product support for
  • WorkCentre® 5945/5955

Hypertext Transfer Protocol (HTTP) is a request-response standard protocol between clients and servers. Clients that make HTTP requests are called User Agents (UAs). Servers that respond to these requests for resources, such as HTML pages, are called Origin Servers. There can be any number of intermediaries, such as tunnels, proxies, or gateways between User Agents and origin Servers.

To Enable HTTP From the Control Panel:

  1. Login as System Administrator from the Control Panel. See the Related Content for additional information.
  2. Select Network Settings.
  3. Select Advanced Settings.
  4. Select HTTP Setting.
  5. Select Enabled then select OK.
  6. Logout of System Administrator mode. See the Related Content for additional information.

To Configure HTTP Settings Using CentreWare Internet Services (CWIS):

IMPORTANT: In order to access CWIS, HTTP must be enabled. If this is the first time you are accessing CWIS, use the steps above to enable HTTP from the Control Panel.

  1. Access CentreWare Internet Services (CWIS) and if necessary, login as System Administrator. See the Related Content for additional information.
  2. Click on the Properties tab.
  3. Click on Connectivity on the left side of the screen.
  4. Click on Setup.
  5. Under Protocol, next to HTTP, click Edit.
  6. Under Connection, select Enabled.
  7. Type a connection port number, as needed.
  8. To encrypt HTTP communication using SSL, under Force Traffic over SSL, select Yes.

    NOTE: When SSL is enabled, all Web pages contain https:// in the URL.

    1. From the Choose Device Certificate menu, select the Device Certificate to use for SSL.
    2. To view the selected certificate details, or save the certificate to your computer, click View / Save.
    3. If using the Default Xerox Device Certificate, you can install the Generic Xerox Trusted CA Certificate in your Web browser. Installing the Generic Xerox Trusted CA Certificate makes sure that your browser trusts the printer.
      To download the certificate, click Download the Generic Xerox Trusted CA Certificate.
    4. Change the Secure HTTP Port Number, as needed.
  9. Under Keep Alive Timeout, enter a time up to 60 seconds. The printer waits this amount of time before terminating a connection.

    NOTE: Increasing the Keep Alive Timeout can cause slow connections.

  10. Click Save.

Related content

Did this help?