1. Open CWIS and login. See the Related Content for additional information.
2. Select [Properties[, [Connectivity], [Protocols], [Proxy Server].
3. Under General, select [Enabled] for Use Proxy Server.
4. Select [Same Proxy for All Protocols] for Proxy Setup, to use same proxy.
5. Next to Proxy Setup, either select [Same Proxy for All Protocols] to use the same proxy settings for HTTP and HTTPs, or select [Different Proxy for each Protocol].
6. Under Addresses to Bypass Proxy Server, enter any web addresses or domains that you want to bypass the proxy server, such as your company’s intranet site.
7. Under HTTP Server, enter the Server Name and Port Number. The default port number is 8000.
8. Next to Authentication, select [Enabled] if the proxy server is configured to require authentication.
   If enabled, enter a Login name and Password. Retype the password to confirm.
9. Under HTTPS Server, enter the HTTPS proxy server information, if needed.
10. Click [Apply].
11. Power off and on the machine. See the Related Content for additional information.