Passer directement au contenu principal

Configure Remote Services

Produits pris en charge: AltaLink C80XX

Numéro d'article: x_alc80xx_en-O2945 | Publié: 21/05/2018

Remote Services is a suite of features that simplify printer ownership and administration. It provides free services to enable administration of metered billing and supplies replenishment plans for printers on a network.

Before you begin, if your network uses an HTTP proxy server, provide information about your proxy server. See the Related Content section for additional information.

Configure Remote Services:

  1. Access the Embedded Web Server and login as System Administrator. See the Related Content section for additional information.
  2. In the Embedded Web Server, click Properties > General Setup.
  3. Click Remote Services Setup.
  4. For Remote Services, select Enabled.
  5. To allow the device to request software files from Xerox, for Remote Software Download, select Enabled.
  6. To allow the device to synchronize with the Xerox licensing server, for Feature Activation, select Enabled.
  7. To allow a Xerox remote server to modify internal device settings, for Update Device Settings, select Enabled.
  8. To synchronize the device with the Xerox Remote Services datacenter on a defined schedule, daily, for Device Synchronization Time, type the time.
  9. To verify communication with the Xerox Remote Services datacenter, click Synchronize Now. A status message shows the result.
  10. If your network uses an HTTP proxy server, to set or update your proxy server, for HTTP Proxy Server, click Edit.
  11. Click Apply.
  12. Logout of System Administrator mode. See the Related Content section for additional information.

Contenus associés

Est-ce que cela vous a aidé?