Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Printer Must Have Address When Connected to EFI Fiery in a Single IP Configuration

Article Id: x_xc560_en-O2351 | Published: 01/19/2021

Product support for
  • Xerox® Color 550/560/570
  • Xerox® Color C60/C70
  • Xerox® Color C75 Press
  • Xerox Color EC70 Printer
  • C75_J75 Family
  • Xerox Color J75 Press

Press the Machine Status button and locate the IP Address section in the lower left of the touch screen or print a Configuration Report to view the IP address. See the Related Content for additional information.

NOTE: If there is no IP address, or the IP address is listed as a different IP Address from, this device will need to be configured to properly communicate with the Fiery Digital Front End (DFE).

Configure the Device to connect to the Fiery Digital Front End:

  1. Press the Log In / Out button on the Control Panel. The Login screen will be displayed.
  2. Login as the System Administrator. See the Related Content for additional information.
  3. Press the Machine Status button on the Control Panel. The Machine Status screen will be displayed on the Touch Screen.
  4. Select the Tools tab on the Touch Screen.
  5. In System Settings, select Connectivity & Network Setup.
  6. Select Protocol Settings.
  7. If necessary, select TCP/IP - Network Settings, and select Change Settings.
  8. Select IPv4 - IP Address Resolution.
  9. Select Change SettingsStatic. 
  10. Select Save.
  11. Select IPv4 - IP Address.
  12. Select Delete Text >
  13. Select Save.
  14. Select IPv4 - Subnet Mask.
  15. Select DeleteText > Enter255.255.252.0.
  16. Select Save.
  17. Select IPv4 - Gateway Address.
  18. Select DeleteText > Enter100.100.100.102.
  19. Select Save.
  20. Select IPv4 -  DNS Server Setup.
  21. Enter
  22. Select Save.
  23. Select Close.
  24. Press the Services Home button.
  25. A "Request to Reboot" message will display. Confirm the request.

Related content

Did this help?