Skip to main content

Set the File Repository Port to 445 in CentreWare Internet Services (CWIS)

Article Id: x_wc7120_en-O16540 | Published: 01/21/2019

Product support for
  • WC7120_WC53XX Family
  • WorkCentre® 5300 Series
  • WorkCentre™ 7120/7125

NOTE: The following steps apply if the File Repository is configured to Scan to SMB. The steps do not apply to Scan to FTP Configurations.

  1. Access the CentreWare Internet Services Page of the Device. See the Related Content for Additional Information.
  2. Select the Properties tab.
  3. Select Services.
  4. Select Network Scanning.
  5. Select File Repository Setup.
  6. Select the Desired Default or Alternate File Destination.
  7. Select Edit.
  8. Enter the Port number 445 into the Port number field if the current port is set to 139.
  9. Select Apply to save changes.

Related content

Did this help?