Skip to main content Click to view our Accessibility Statement or contact us with accessibility-related questions.

Align and Lock the Paper Tray Guides against the Edges of the paper for Trays 1, 2 and 5

Article Id: x_wc5955_en-O7731 | Published: 06/15/2017

Product support for
  • WC5945_WC5955 Family
  • WorkCentre® 5945/5955

The paper tray guides must be against the edges of the paper loaded in the tray. The guides should be locked into position if using a standard paper size.

NOTE: The guides may not lock into position if you are using a custom paper size.

The paper trays accommodate standard paper sizes. If you are using non-standard paper sizes, load the paper in the Bypass Tray (Tray 5).

Tray 1 or 2:

  1. Open the required Paper tray.



  2. Pull the Paper Tray Guides out from the edge of the paper.



  3. Square up the Paper in the tray.



  4. Push the Paper Tray Guides tightly against the edge of the Paper.

    NOTE: Guides should click into place if using standard size Paper.

  5. Close the Paper tray.



  6. Confirm the Paper Size, Type, and Color on the control panel.

Tray 5 (Bypass Tray):

  1. Move the Paper Tray Guides fully out.
  2. Remove Paper from the tray.
  3. Insert Paper in the tray.
  4. Push the Paper Tray Guides tightly against the edge of the Paper.



  5. Confirm Paper Size, Type, and Color on the control panel.

Did this help?