Skip to main content Click to view our Accessibility Statement or contact us with accessibility-related questions.

Configure SNTP

Article Id: x_vlb400_en-O3717 | Published: 01/30/2019

Product support for
  • VersaLink B7025_B7030_B7035 Family
  • VersaLink C7000_C7020_C7025_C7030 Family
  • VersaLink B400
  • VersaLink B405
  • VersaLink B600_B610
  • VersaLink B605_B615
  • VersaLink C400
  • VersaLink C405
  • VersaLink C500
  • VersaLink C505
  • VersaLink C600
  • VersaLink C605
  • VersaLink C7000
  • VersaLink C7020_C7025_C7030
  • VersaLink® B7000 Series

Simple Network Time Protocol (SNTP) synchronizes the internal clocks of computers over a network connection.

IMPORTANT: Depending on the Permissions settings, some services and settings are locked or hidden until you enter the administrator user name and password.

Configure SNTP from the printer control panel:

  1. At the printer control panel, press the Home button, then touch the Device button.
  2. Touch General > Date & Time.
  3. To allow an SNTP service to set the time automatically, enable the Set Automatically toggle button.
  4. Touch Time Server (SNTP), then type the IP Address or host name of your SNTP server, then touch OK.
  5. To set the time zone, touch Time Zone, then touch your region.
  6. To adjust daylight saving time automatically, enable the Daylight Saving Time toggle button.

    NOTE: For the new settings to take effect, restart your printer.

Configure SNTP from the Embedded Web Server:

  1. In the Embedded Web Server, log in as administrator, then click on Connectivity.
  2. In the Protocols area, click SNTP.
  3. For Time Server Synchronization, click the toggle button to enable.
  4. Click OK.
  5. For Time Server Address, type the IP Address or host name of the time server.
  6. For Time Synchronization Interval, type the synchronization interval in hours.
  7. Click OK.

NOTE: For the new settings to take effect, restart your printer.

Did this help?