Skip to main content Click to view our Accessibility Statement or contact us with accessibility-related questions.

Adjust Paper Tray 2 Rear Stop Guide

Article Id: x_digicpyprt_en-O7691 | Published: 08/29/2016

Product support for
  • Nuvera 100 Printer/Copier
  • Xerox Nuvera® 100 MX
  • Xerox Nuvera® 100 Production System
  • Xerox Nuvera® 120 Copier/Printer
  • Xerox Nuvera® 120 MX
  • Xerox Nuvera® 120 Production System
  • Xerox Nuvera® 144 MX
  • Xerox Nuvera® 144 Production System
  • Xerox Nuvera® 200/288 MX
  • Xerox Nuvera® 288/314 Presses
  • Xerox Nuvera® 120/144/157 Presses

The Rear Stop Guide is adjusted by lifting and rotating the guide to the right (enable) or left (disable).

NOTE: You may need to temporarily disable (lift and rotate to the left) the guide to load paper.

If switching from Letter (216 x 279 mm / 8.5 x 11 in.) to A4 (210 x 297 mm/ 8.3 x 11.7 in.), contact support to place a service call to have the guide adjusted.

  • Enable Rear Stop Guide: If using A4 (210 x 297 mm/ 8.3 x 11.7 in.) or Letter (216 x 279 mm / 8.5 x 11 in.), the Rear Stop Guide should be enabled by lifting and rotating the guide to the right.

    stop guide

    Close up of enabled Rear Stop Guide:
    close up stop guide

  • Disable Rear Stop Guide: For all other size papers, the Rear Stop Guide should be disabled by lifting and rotating the guide to the left.

    stop guide

    Close up of disabled Rear Stop Guide:
    close up stop guide

Did this help?