Skip to main content Click to view our Accessibility Statement or contact us with accessibility-related questions.

Wipe up Toner (Dry Ink) With a Dry Cloth, Dry Paper Towel or Sweep Gently With a Dry Brush

Product support for: Phaser 6300/6350, Phaser 6360

Article Id: x_6300_en-O3085 | Published: 11/30/2016

CAUTION: Do not use warm water or cleaning solvents to remove Toner (Dry Ink) from your skin or clothing. This will set the Toner and make it difficult to remove. If any Toner gets on your skin or clothing, use a brush to remove the Toner, or wash it off with cold water and mild soap.

When a Toner vacuum is not available to clean up Toner that has spilled inside of a printer, a dry cloth, dry paper towel, or dry brush may be used.

To prevent personal injury and / or damage to the printer when cleaning spilled Toner, follow the guidelines below:

  • Do not use compressed or canned air to blow out the printer.
  • Do not use liquids or solvents to clean up Toner spills inside a printer.
  • Do not allow Toner to touch electrical components. Toner is electrically conductive and can cause electrical component failure if it reaches sensitive components.
  • Do use gentle motions when wiping or brushing up Toner spills.

For health related information, See the Related Content section for additional information.

Related content

Did this help?