Skip to main content Click to view our Accessibility Statement or contact us with accessibility-related questions.

Remove and Re-install the Transfer Module

Article Id: x_1632_en-O49974 | Published: 02/08/2017

Product support for
  • DocuColor™ 240/250
  • DocuColor 5065

WARNING: The machine parts are very hot to touch and remove. Never touch a labeled area indicating 'High Temperature' and 'Caution' to avoid burns.

  1. Make sure that the machine has stopped copying / printing, and then open the Front Door.

    Open the front door

  2. Turn handle 2 to the right until it is in the horizontal position, and then pull out the Transfer Module.

    Turn handle 2

    Open transfer module

  3. Push in the Transfer Module completely and turn handle 2 to the left.
  4. Close the Front Door.

Did this help?