Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Configure, Modify or Verify General Print Settings

Product support for
AltaLink C8130 / C8135 / C8145 / C8155 / C8170 Color Multifunction Printer
Article ID
KB0029377
Published
2020-06-01

  1. Login as Administrator at the Embedded Web Server (EWS). For additional information, click on Access and Login or Logout as System Administrator at the Control Panel or Embedded Web Server (EWS).

  2. In the Embedded Web Server, click Properties→Apps.

  3. Click Printing→General.

  4. To print a configuration report when the printer is powered on, for Configuration Report, select Print at Power on.

  5. To restrict printing of the configuration report and information pages to the system administrator, for Configuration / Information Pages Report, select Restrict to System Administrator.

  6. To erase all print jobs from the print queue at power-on, select Delete All print jobs at Power On.

  7. To reduce the spooling rate for network jobs, for Reduce spooling rate of network jobs (to prevent rejection errors), select Enabled.

  8. For Held Job Policy, select options as needed.

    • To require active jobs to print in the order that they were received after a held job, for Allow Print Around on Held Jobs, select No.

    • To enable users to print active jobs before a held job prints, for Allow Print Around on Held Jobs, select Yes.

    • To allow a job to print to an alternate paper source, for Allow ‘Print on Alternate Paper’ When job is ‘Held for Resources’, select Yes.

  10. To set the amount of time that the device holds print jobs before jobs are deleted, for Delete Held Jobs After, enter the number of days, hours, and minutes.

  11. For Banner Sheet, select options as needed.

    • To print a banner page with each print job, for Print Banner Sheets, select Yes. To disable this option, select No.

    • To allow the print driver to override the setting for banner pages, for Allow the Print Driver to Override, select Yes.

    • To select the text that appears on the banner pages, for Banner Sheet Identification, select an option.

  13. To print an error sheet when a print job fails, for Print Error Sheets, select Enable.

  14. In the Defaults & Policies area, for each setting, select options as needed.

  15. Click Save.

  16. Logout as Administrator at the EWS.