How To Connect Wireless on the Phaser 3260

To connect wireless on 3260 using WPS:

1. Press the green power button on the Phaser 3260 to wake up the printer.  Make sure the light bar under the (!) icon is lit solid green.

2. Press and hold the WPS button until the green bar under the (!) icon flashes, then release the button when it begins flashing.

3. While the button is flashing, within two (2) minutes, locate and press the WPS button on your router to activate WPS - PCB mode.

4. If successful, the light bar under the (!) icon will change to a solid blue. The printer will then print a network configuration page. 

To connect wireless on 3260 using Xerox Easy Wireless Setup:

1. Select Start>Xerox Printers > Xerox Easy Wireless Setup.
   
   Note: For Windows 7: Select Start > Programs or All Programs > Xerox Printers, and then select Xerox Easy Wireless Setup.
   
   

2. Connect the machine to your computer using the USB cable. During the installation, the printer needs to be temporarily connected using the USB cable.
   
   Note: You cannot use the Phaser 3052 / 3260, WorkCentre 3025 or WorkCentre 3215 / 3225 models on a wired and wireless network at the same time. If your printer is connected to the network with an Ethernet cable, unplug the cable.
   
   

3. Select Next.

4. Once the machine is connected to the computer with the USB cable, the program searches for WLAN data. When the search is complete, the Select Wireless Network window displays. Select your network from the list.

5. Select Next. The Wireless Network Security screen displays.

6. Enter your Network Password and select Next.

7. At the Wi-Fi Direct Settings screen, uncheck the box next to Yes, I want to turn on Wi-Fi Direct on my printer.

8. Select Next.

9. Click Finish when the Wireless Network Setup Complete screen displays.