Change the Power Saver Timer Using the Embedded Web Server

You can set the time the printer spends idle in ready mode before it automatically transitions to a lower power level.

To configure Power Saver Timeouts:

1. In the Embedded Web Server, click System.
2. Click Power Saver.
3. To set the delay before the printer enters Low-Power mode, for Low Power Timeout, enter the number of minutes.
4. To set the delay before the printer enters Sleep mode, for Sleep Timeout , enter the number of minutes.
   
   NOTE: Set the timeouts so that the sum of both is within 60 minutes.
   
   
5. Click Auto Power Off, then select an option.
6. Click OK.