How To Replace the Finisher Staple Waste Container

Warning: To avoid personal injury, use care when removing the staple waste container.

The Production Press displays a message when the staple waste container is full. When the message appears, replace the container with a new one.

Important:

• Before performing this procedure, ensure that the Productiion Press is not running.

• Keep the Production Press powered on when replacing the staple waste container. If powered off, the Production Press does not recognize the replacement of the waste container, and a full message remains displayed.

• To ensure that the Production Press continues to run after replacing the waste container, close the finisher front cover.

Note: A staple waste container comes with the basic staple cartridge.

1. Open the finisher front cover.
   

2. Move the lock lever under R5 toward the left to the opened-lock mark.
   

3. Pull out R5.
   

4. Place the used staple waste container into the plastic bag supplied.

   Note: Do not disassemble the used waste containers. Return the used staple waste containers to the Customer Support Center.

   
   

5. Insert the new staple waste container by lowering it into position and gently pushing it into place.
   Warning: To prevent injury, do not put your fingers on top of the container.
   
   

6. Move the lock lever under R5 to the right to the closed-lock mark.
   

7. Close the finisher front cover.