Skip to main content

Enable / Disable USB Ports

Product support for: Phaser 3330, WorkCentre 3335_3345

Article Id: 2016982.html | Published: 08/15/2017

NOTE: If USB ports are disabled, you cannot use a USB card reader for authentication, update the software, or print from a USB Flash drive.

  1. In Xerox® CentreWare® Internet Services, click Properties > Security.
  2. Click USB Port Security.
  3. To enable a port, next to a port, select Enabled.
    To disable the ports, clear the check box.

    NOTE: You can prevent unauthorized access to the printer through USB ports by disabling the ports.

  4. Click Apply.

Did this help?