Skip to main content Click to view our Accessibility Statement or contact us with accessibility-related questions.

Perform Color Calibration

Article Id: 1721693.html | Published: 11/10/2016

Product support for
  • Phaser® 7800
  1. Select [Printer] on the Touch Screen.

    Select Printer

  2. Select the [Tools] tab.
  3. Select [Troubleshooting].

    Select Tools, Troubleshooting

  4. Select [Resolve Problems].

    Select Resolve Problems

  5. Select [Colors Look Wrong]. A "Are colors off, or look drastically wrong?" message will be displayed.

    Select Colors Look Wrong

  6. Select [Calibrate Color]. The Color Calibration page will be printed.

    Select Calibrate Color

  7. Select the required calibration option:
    • [Calibrate Both] (recommended)
    • [Color Density Only]
    • [Gray Balance Only]
    • [Restore Defaults]
  8. Select [Next].

    Select calibration option

  9. Select a paper tray to print the Calibration Pages from, and then select [Next].

    Select a tray

  10. Select the light type where you will view the printed Calibration Pages, and then select [Next] to print the Calibration Pages.
    • [Normal Office Lighting]
    • [D50 Calibrated Light]
  11. Select  a Lighting setting

  12. If Gray Balance Only was selected in step 7, skip to step 17; otherwise, continue with the next step.
  13. Modify Cyan, as required, and then select [Next].

    Edit Cyan

  14. Modify Magenta, as required, and then select [Next]. Calibration Pages will be printed.

    Edit Magenta

  15. Modify Green as required, and then select [Next].

    Edit Green

  16. Modify Black, as required, and then select [Next]. Calibration Pages will be printed.

    Edit Black

  17. If Color Density Only was selected in step 7, skip to step 23; otherwise, continue with the next step.
  18. Enter a number between 0 - 54 in the Light Hexagon Number field, and then select [Next].

    Select Light Hexagon Number

  19. Select a number between -5 and +5 in the Light Bar Number field, and then select [Next].

    Select Light Bar Number

  20. Enter a number between 0 - 54 in the Medium Hexagon Number field, and then select [Next].

    Select Medium Hexigon Number

  21. Select a number between -5 and +5 in the Medium Bar Number field, and then select [Next].
  22. Enter a number between 0 - 54 in the Dark Hexagon Number field, and then select [Next].

    Select Dark Hexagon Number

  23. Select a number between -5 and +5 in the Dark Bar Number field, and then select [Next].

    Select Dark Bar Number

  24. When the Color Calibration Complete window is displayed, select [Done].

    Select Done

Did this help?