Skip to main content

Login or Logout as a System Administrator or Key Operator and Access the Tools Mode

Article Id: x_wc5790_en-O10834 | Published: 03/27/2020

Product support for
  • WC5790 Family
  • WorkCentre® 5700 Series
  • WorkCentre™ 5765/5775/5790

NOTE: A video is available at the end of this solution

To log in to the printer:

  1. Press the [Login In / Out] button on the Control Panel. The Authentication: Login Required screen will be displayed.
  2. Select the [Keyboard] button on the Touch Screen.
  3. Enter the username using the keypad on the Touch Screen, and then select [Next].
  4. Enter the password, and then select [Done]. The password characters will be displayed as asterisks (*).

    NOTE: The default username is "admin" and the default password is "1111." The password will be displayed as an asterisk (*). If you make a mistake, press the [Clear (C)] button on the Control Panel and re-enter the password. To cancel the operation, press the [Cancel] button. If you are experiencing problems with your username or password, or have forgotten either of them, contact your administrator.

To log out of the printer:

  1. Press the [Log In / Out] button on the Control Panel. An "Are you sure you want to logout?" message will be displayed.
  2. Select the [Logout] button on the Touch Screen.

Video:

Did this help?