Log in to the Printer's Embedded Web Server as a System Administrator

The Embedded Web Server is the administration and configuration software installed in the printer. It allows you to configure and administer the printer from a Web browser.

NOTE: When using the printer as a local printer via USB, the printer's web interface can not be used.

The Embedded Web Server requires:

• A TCP/IP connection between the printer and the network in Windows, Macintosh, UNIX, or Linux environments.
• TCP/IP and HTTP enabled in the printer.
• A network-connected computer with a Web browser that supports JavaScript.

To log in to the Embedded Web Server:

IMPORTANT: Some features or settings are only visible or adjustable when logged in as a System Administrator. To log in as a System Administrator:

1. From a computer on the same network as the printer, open a Web browser window.
2. Enter the IP address of the printer in the Address field, and then press Enter or Return.
3. Click on the Log In button at the top, right of the page. The User Accounts window will be displayed.
4. Click on Admin.
5. Enter the System Administrator password in the field provided.
   
   Note: Depending on when the device was manufactured or the software version installed, the default password may be the device serial number or 1111.
   
   
6. Click on the Log In button.

To log out of the System Administrator Mode:

1. Click on Admin at the top, right of the page.
2. Click on Log Out.