Skip to main content

Configure Wi-Fi Direct Using CentreWare Internet Services (CWIS)

Article Id: x_3000_en-O1857 | Published: 04/25/2016

Product support for
  • Phaser 3020
  • Phaser 3052
  • WorkCentre 3025
  • WorkCentre 3215
  • WorkCentre® 3225
  • Phaser® 3260

Wi-Fi DirectTM allows you to enable your wireless devices, such as notebooks, mobile phones, and PCs, to establish wireless connectivity without the need for a wireless router, access point, or Wi-Fi hot spots.

  1. At your workstation, open the Web browser and enter the IP Address of the machine in the Address Bar.
  2. Press Enter.
  3. Select Properties.
  4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
  5. Select Properties.
  6. In the Network Settings link, select the Wi-Fi link. Then select the Wi-Fi DirectTM link below that.
  7. Select On for Wi-Fi DirectTM.
  8. Enter the following:
    • Device Name
    • IP Address
    • Activate or Deactivate the Group Owner
    • Network Key
  9. Select Apply and then OK.

Did this help?