Παράλειψη στο κύριο περιεχόμενοΚάντε κλικ για να δείτε τη Δήλωση μας για την Προσβασιμότητα ή επικοινωνήστε μαζί μας εάν έχετε ερωτήματα σχετικά με την προσβασιμότητα.

SMart eSolutions Communication Failure Message

Product support for
Phaser 3635MFP, Phaser 4600/4620, Phaser 4622, Phaser 6600, Phaser 7100, Phaser 7800, ColorQube 8700, ColorQube 8900, ColorQube 9301/9302/9303, Xerox D136 Copier/Printer and D136 Printer, Xerox D95/D110/D125 Copier/Printer, Xerox ED95A/ED125 Copier/Printer, WorkCentre 3550, WorkCentre 3615, WorkCentre 4250, WorkCentre 4260, WorkCentre 4265, WorkCentre 5325/5330/5335, WorkCentre 5735/5740/5745/5755, WorkCentre 5765/5775/5790, WorkCentre 6605, WorkCentre 7120/7125, WorkCentre 7525/7530/7535/7545/7556, WorkCentre 7755/7765/7775
Article ID
KB0050567
Published
2022-04-21

Required Action: To continue Secure Automated Meter Reads and Toner Replenishment (ASR), the printer software must be upgraded with latest encryption protocol, or installation of a Device Manager. See the Related Content for additional information and a direct link to product model specific directions and software.

• i-Series Models: No actions are required. i-Series models were launched with software including the required encryption protocols.
• Product Model Not Listed: Use the most current version of Device Manager to establish communications to continue Secure Automated Meter Reads and Toner Replenishment.

Note: When the software upgrade is completed, or Device Manager has been installed, and if communication is not established, continue with the steps below, or restart your search with the displayed fault, message, or key words.

  1. Validate SHA2 Security is present for Remote Services:

    Make sure your product software is at the SHA-2 certificate level required as of May 2019.
    For additional information refer to Requirements for Remote Services on Printers Using SHA-2 Authentication Directly at Printer -OR- Via a Device Manager App.

  2. Make sure SMart eSolutions is configured correctly via CWIS.

  3. Make sure the date/time is set correctly on the printer.

  4. If the problem persists, contact Support for additional assistance.




    Related Content