Product support
Vyberte prosím ze seznamu digitální front-end systém a stiskněte Použít filtry
Note, when downloading a print driver, please select your operating system from the "Platform" drop down menu
Windows XP Notification: Konec podpory systému Windows XP -- Co potřebujete vědět (PDF-Angličtina)
Windows 2000 Microsoft printer drivers and PPD (PostScript Printer Description) for the Fiery XJ+, v 3.2.
Macintosh 7/8 printer drivers and PPD (PostScript Printer Description) for the Splash M Series.
Macintosh 7/8 printer drivers and PPD (PostScript Printer Description) for the Splash PCI series.
Macintosh 8 Print drivers and PPD (PostScript Printer Description) for Fiery X2
Macintosh 8 Print Drivers, PPD (PostScript Printer Description), and utilities for the Fiery ZX6 and 9, v 1.1.
Macintosh OS 8 Print Drivers, and PPD (PostScript Printer Description), for Splash PCI 6 series.
Macintosh OS X PPD (PostScript Printer Description) installer for Splash PCI 6 ver 6.0.2
Windows 2000 and Windows XP have not been tested by Xerox Engineering on these Splash Server and therefore is not "officially" supported. Some customers have been successful in using the following configuration, but results may vary.
Splash PCI 5x Print Driver PPD for use with Windows 2000, Windows XP, and Windows ME clients.
Windows 2000 and Windows XP have not been tested by Xerox Engineering on these Splash Server and therefore is not "officially" supported. Some customers have been successful in using the following Work Around configuration, but results may vary.
Splash PCI 6x Print Driver PPD for use with Windows 2000, Windows XP, and Windows ME clients.
Windows 2000 Print Drivers and PPD (PostScript Printer Description) for Fiery X2 contains both ver 1.0 and 1.01M (V1.01M for Majestik 5760/65 only). These drivers are provided "AS IS".
Windows 2000 Print Drivers and PPD (PostScript Printer Description) for Fiery Si v1.2. These drivers are provided "AS IS".
Windows 2000 Print Drivers (PPD) for Fiery ZX6&9 v 1.1 These drivers are provided "AS IS".
Macintosh OS 8 8.3.1 Print Driver, and PPD (PostScript Printer Description), for the Fiery XJ+ Ver 3.2
Utilities for Windows NT 4.x are not supported.: Utilities may be used but there may be some incompatibility issues.Try using the windows 95 utilities.
Windows 3.x or Machintosh Splash M Series Configuration Wizard is not available.
Macintosh utilities for the Fiery ZX6 and 9, v 1.1.
Macintosh 7 utilities for the Fiery SI.
Macintosh 7 utilities for the Fiery X2.
Macintosh 8 M-series Viewer
Windows M-series Viewer for the DocuColor 5750, 5790, and 5799.
Windows 9x/NT4 Splash M series Configuration Wizard. This program creates/modifies the DP.INI configuration file via a user friendly Graphical User Interface.
Windows Utilities for Fiery X2
Windows Utilities for Fiery SI
Windows Utilities for Fiery XJ+ 3.2
Receive a NCP 97 reply packet error when trying to connect to a Novell Server v. 4.x & 5.0 that is configured for Signature Packet 2.
This patch resolve problem with Fiery Server locking up when browses to an NDS container that contains over 256 print servers or, When you back out of Pserver Setup to Network Setup -> Services Setup.
The Fiery Server could lock up in the following situations if there must be an NDS tree which has one container that contains over 256 print servers: 1. If the Fiery Server browses in this container. 2. When you back out of Pserver Setup to Network Setup -> Services Setup.
1 - Xerox ZX6/9 v.1.1 will not slow down when printing 11x17 page as thick paper in the PPD. 2 - This will also cause the 11x17 transparency to only print half of the page.
This patch will resolve the following problem with Fiery X2 server connected to Xerox 5790 Copier / Printer. Xerox 5790 Copier / Printer will not slow down when printing 11x17 page as thick paper in the PPD. This will also cause the 11x17 transparency to only print half of the page.
This update allows new section to appear on the configuration page which lists all installed patches.
For 5790 Copier / Printer only
This patch resolves problem with 11 X 17 Heavyweight mode not functioning properly when X2 server is configured for a 5790 Copier / Printer.
Unix based systems do not allow in their queue naming convention the use of special characters such as dashes or slashes. This update will allow Unix based systems to use standard naming conventions when printing to the Fiery SI v1.2.
This update will invoke the use of CRDs (Color Rendering Dictionaries) in a Windows NT 4.0 (Intel) environment for Microsoft Office Applications only. This update also consists of PPDs which will allow you to print a transparency or thick paper from the bypass tray.
This update will invoke the use of CRDs (Color Rendering Dictionaries) in a Windows NT 4.0 (Intel) environment for Microsoft Office Applications only. This update also consists of PPDs which will allow you to print a transparency or thick paper from the bypass tray.
This patch resolves problem with the Fiery XJ+ server occasionally rebooting or hanging at software installation.
Job Notes field not to be present when printing from NT 4.0.
This update allows the user the ability to select 1 pass black versus 4 color black via replacement of the Monitor CRD (Color Rendering Dictionaries) . This update allows the user to print multiple page jobs mixed with Level 2 color when invoking the Monitor CRD to print single color black text.
This update contains the files necessary to turn source routing off of the client for those sites that are have routing built into the ring. This will enable them to connect to the token ring.