Xerox Color 550/560 Printer avec Xerox EX Print Server (powered by Fiery) Assistance & pilotes

This is for the driver for the 1.1 ex550/560 software. This driver will only work with 1.1 software.

Windows Print Driver for Fiery EX 550-560 Print Server for the Xerox Color 550/560 Printer. Supports both Windows 32-bit and 64-bit.

Fiery EX550/560 sp5- fixes the following issue: “internal error: unknown error” when processing certain PDF files from indesign “unknown error” when processing certain pdf files from powerpoint 2010 Mesh object with pantone spot color will be printed on every page in illustrator’s host based separator.

For the Fiery EX 550/560 1.1 service pack 4 Includes the following: • Problem printing PCL files to Fiery, request 295x200 (7.9 x11.6 inches) instead of A4. • 066933922: "Error: DLC error flag set, abort page." is encountered when printing this file. •791421198: random codes 127-211, or 127-210 when printer runs out of paper, paper jam or whatever stops the print

This software patch contains fixes for the following SPARs: SPAR # Description 1. No pause at page 65 when the job prints a3 100 pages and staple 2 Unable to print calibrations pages when XSA is enabled Also included the following fixes: • Fiery locking up • Fiery saying exited and 127-211 error • Fiery disconnecting

We tested this software patch specifically for the System Problem Action Requests (SPARs) noted below. If your SPAR number is not listed, we are providing you this software either because you reported a problem that resembles one of the listed fixes or because our testing has shown that this software should resolve your problem. If this software does not resolve your problem, please contact the hotline and provide a detailed job scenario and sample job(s) for further investigation, testing, and resolution. This software patch contains fixes for the following SPARs: SPAR # Description 1. 151612498 260153349 No landscape orientation in impose 2 up. 2.920596740 Adjust image transfer causes print images to print with low density. 3.462441646 176284230 Scanning issue. 4.875962470 Job will not print when machine is in energy saver mode

This is the service pack for the Ex550/560 1.1 sp1. the following items are fixed: • The timeout of the fiery secure print page is too long • Patch to address ink/waste toner bin full message for print queue on mac os x 10.6.8 (602110892) • Unable to create 15 sheet booklet with cover defined as heavyweight using professional finisher (223888156) • Increase booklet sheet limitation from 20 to 25 sheets • Conflict is displayed when half z-fold and offset are set from driver • Orientation option is not available in job properties • Fiery falls off the network (162595540) _ Booklets with more than 14 sheets can't be printed from the fiery driver or the cws.

This is a server fix that fixes the following issue: -irregular thin lines are defined poorly when quality is set to best -Fiery crashes when processed and held job is print with APPE enabled.

Patch 1-1CU8EH(EFIGs)
Install this patch on the fiery server and it will updated the EFIGs driver on the fiery.
Fixes unable to offset half-z-fold sheets in the ps driver.

Spars fixed SPAR # Description 1.194502162 - You cannot program a stapled booklet with more than 20 sheets if you have the Booklet Maker Finisher option (it should allow up to 25 sheets).
2.656473188 785326475 - You cannot select trays 1-4 for the Input Tray when calibrating or trays 6 or 7 if you have the Oversized High Capacity Feeder.
3.932742235 - Using CWS, you cannot program a job as booklets and no covers which can result in undesired blank pages when you do not want a cover.
NOTE: To program a job for booklet imposition and no cover, you program the job to print on both sides for front covers and print on any side for back cover. NOTE: To program a job via print driver, you must also install driver patches 1 19UD02 (EFIGS) or 1 1ATFKH (Nordic) in addition to1.0SP1.

Following patches are obsolete now (they are included in sp1): Patch Name Description
1 19QN74 (server side) - The document settings tab is not available in the driver properties.A conflict message occurs when you select 3 hole punch and double left staple.The Orientation Override option is missing in Command Workstation.
1 1A3P9W - Jobs submitted via driver to an LPR port do not show up in Command Workstation until the Fiery is rebooted.
1 1AFUGF - A 45-360 fault code occurs intermittently on some systems resulting in unnecessary replacement of the VSEL board.

This patch fixes multiple fixes. Please refer to Release Notes for specific fixes.

This Patch supercedes 1-18OY98, 1-18TDCT, 1-18WR6X, 1-19121X, 1-18ZL1L, 1-199K2P, 1-19HPAR, 1-1A3PAH, 1-1A23JL and 1-1AEGLP.

Xerox Color 550/560 Software Release v55.30.61

ICC Color Profiles for for Fiery EX 550-560 Print Server for the Xerox Color 550/560 Printer