WorkCentre 7525/7530/7535/7545/7556 avec EFI Fiery Controller Assistance & pilotes

Windows Postscript Print Driver for printing through the Fiery Controller attached to a WorkCentre 75xx. Supports both Windows 32-bit and 64-bit.

EFI WorkCentre Config Utility is an application for the Fiery Controller that allows you to configure Print Accounting, Scan-to-FTP, SNMP, HTTP, and Administrator password to match the WorkCentre 7500 configuration if changed. For additional information, please see the Fiery Controller Configuration and Setup Guide.

This patch is a Composite Patch of all previous patches released since 1-18GCJ1. This Composite Patch includes: • 1-198JNP: The Fiery icon does not display when connected to the printer for the first time or after the system software has been reinstalled. • 1-19FU5H: When Secure Erase is enabled, Job Properties in Command WorkStation performs slowly when submitting jobs. • 1-19KDFE: All jobs printed to Upper Center Tray contain job errors. • 1-19M53H: Improves gradation smoothness. • 1-19SQ4A: An error occurs when trying to enable logging on the Fiery Controller. • 1-1ADP4T: Equitrac Office cannot retrieve JBA data from the print server. & Print output is black-and-white after enabling, then disabling, the Xerox Standard Accounting - Color tracking only feature.

This patch will fix an issue when the Fiery Network Controller is not connected to a network or is connected to a customer network where DHCP services are not available, the Fiery Network Controller Start page will not print and the Fiery button will not appear on the WC75xx UI. The Fiery Network Controller will show “00”.