Drivers
- Date: Oct 11, 2011
- Version:
- Size: 4.7 MB
- Format: EXE
WorkCentre 3045B WIA Scan Driver 32-bit
- Scan
DescriptionWIA Scan Driver for the WorkCentre 3045B (3-in-1 model without fax). This driver must be installed with the Add Scanner Wizard and is used with a USB connection.- Date: Oct 11, 2011
- Version:
- Size: 4.7 MB
- Format: EXE
WorkCentre 3045NI WIA Scan Driver 32-bit
- Scan
DescriptionWIA Scan Driver for the WorkCentre 3045NI (4-in-1 model with fax). This driver must be installed with the Add Scanner Wizard and is used with a USB connection.- Date: Oct 11, 2011
- Version: 1.005
- Size: 3.8 MB
- Format: EXE
3045B Print Driver 32-bit
- WHQL
DescriptionPrint driver for the WorkCentre 3045B (3-in-1 model without fax). This driver uses the Add Printer Wizard and is Microsoft WHQL certified- Date: Oct 11, 2011
- Version: 1.005
- Size: 1.2 MB
- Format: EXE
3045NI Fax Driver 32-bit
- WHQL
DescriptionFax driver for the WorkCentre 3045NI (4-in-1 model with fax). This driver uses the Add Printer Wizard and is Microsoft WHQL certified- Date: Oct 11, 2011
- Version: 1.005
- Size: 3.8 MB
- Format: EXE
3045NI Print Driver 32-bit
- WHQL
DescriptionPrint driver for the WorkCentre 3045NI (4-in-1 model with fax). This driver uses the Add Printer Wizard and is Microsoft WHQL certified
Utilities & Applications
- Date: Oct 11, 2011
- Version:
- Size: 228.9 MB
- Format: EXE
WorkCentre 3045B CD Package
DescriptionContains the entire CD image for the WorkCentre 3045B (3-in-1 model without fax) and launches the Easy Setup Navigator which can be used to install the print and scan driver software.- Date: Oct 11, 2011
- Version:
- Size: 277.2 MB
- Format: EXE
WorkCentre 3045NI CD Package
DescriptionContains the entire CD image for the WorkCentre 3045NI (4-in-1 model with fax) and launches the Easy Setup Navigator which can be used to install the print and scan driver software.
Firmware
- Date: Sep 11, 2012
- Version: SG3_XC_1.05(C1)
- Size: 3.4 MB
- Format: ZIP
WorkCentre 3045B Firmware version SG3 XC 1.05(C1)
DescriptionFirmware update for the WorkCentre 3045B (3-in-1 model without fax).
This firmware update fixes the following issues:
• Changed the default TIFF type for scanning to TTN2
• improved the wording for some error messages
• corrected some branding issues
- Date: Sep 5, 2012
- Version: SG4_XC_1.16c
- Size: 4.6 MB
- Format: ZIP
WorkCentre 3045NI Firmware version SG4 XC 1.16c
DescriptionFirmware update for the WorkCentre 3045NI (4-in-1 model with fax).
This firmware update fixes the following issues:
• added a feature to disable the ability to update the WorkCentre 3045’s firmware.
• Russia Fax: DTFM value set to -3dB & ring sensitivity fixed
• SNMP supplies status reporting improvements
• Changed the default TIFF type for scanning to TTN2
• fixed a problem where the print resolution dpi was not reported correctly in CWIS
• Problem setting a password that contains special characters when creating an SMB address book entry in CWIS.
• Problem entering Russian characters in the “Printer Location” field in CWIS
• improved the wording for some error messages
• Data LED light should be on when a fax is stored in memory
• corrected some branding issues
Note: It is highly recommended to consult with your Network or System Administrator before performing any software (firmware) update. Some updates may cause the machine to become non-compliant and cease to work as intended with the environment in which it is installed.