|
|
 |
| | > v1.2 Patch (116UK9) Composite patch for multiple issues. | | Versão: 116UK9 | Data: 02-03-2009 | Tamanho: 14,4MB | Idioma: Português | | This patch fixes these items: 1. Importing an archived job hangs in a processing state. 2. Output of arcived images are corrupted. 3. PDF barcode outputs a corrpted barcode image. 4. Files from Cored X4 are missing images or outputs a black box over the image. 5. Output image is distorted. | | Nota para o: This patch may be installed by the customer following the included Installation Instructions.
Your system must be at version 1.2 prior to installing this software. |  | Aviso: PREREQUISITE(S): Install only onto Fierys with 1.2 system software and patchs 1-XVE1A , 1-YNN0J and 1-ZZJED. You may corrupt the software if the prerequsites are not followed.
See Install Instructions for details. |
| |
| |
|
|
| | > v1.2 Patch (1-ZIFBX) Better color match of 1.2 | | Versão: 1 | Data: 02-03-2009 | Tamanho: 97,4KB | Idioma: Português | | This patch will allow Fiery version 1.2 to more closely match color that was produced with 1.1 software. | | Nota para o: This patch may be installed by the customer. Installation instructions and Customer Letter are included with the patch file. | | Aviso: PREREQUISITE(S): Install only onto Fierys with 1.2 system software and patchs 1-XVE1A , 1-YNN0J, 1-ZZJED and 1-116UK9. You may corrupt the software if the prerequsites are not followed.
See Install Instructions for details. |
| |
| |
|
|
| | > Splash RPX-ii v 2.0.6 | | Versão: 2.0.6 | Data: 01-10-2008 | Tamanho: 228,1MB | Idioma: Português | | Contains fixes for issues discovered with previous releases. Please see the release notes for details and installation instructions. | | Aviso: Prerequisite: RPX-ii v2.0 or later. ***Version 2.0.6 may be installed over any RPX-ii release version 2.0 or later. It is not necessary to install any other updates before installing v2.0.6*** |
| |
| |
|
|
| | > v1.2 Patch (1-YNN0J) Composite patch for multiple issues. | | Versão: | Data: 28-08-2008 | Tamanho: 8,1MB | Idioma: Português | | This patch fixes these items:
1. Cancelling the job with an Out of Paper message locks the message in memory until rebooted.
2. Quark file hangs if batched with a PDF file. | | Nota para o: Installation instructions and Customer Letter are included with the patch file. | | Aviso: PREREQUISITE(S): Install only onto Fierys with 1.2 system software and patch 1-XVE1A. You may corrupt the software if the prerequsites are not followed.
See Install Instructions for details. |
| |
| |
|
|
| | > v1.2 Patch (1-UQJAH) Calibration page buttons with French language mismatched. | | Versão: 1 | Data: 12-08-2008 | Tamanho: 591,8KB | Idioma: Português | | Mismatched button names on French Calibration Instruction
Page and French IOT screen. | | Nota para o: Installation notes and instructions are included. | | Aviso: PREREQUISITE(S): Install only onto Fierys with 1.2 system software and patch 1-XVE1A.See Install Instructions for details. |
| |
| |
|
|
| | > 1-YBL1X Patch for EXP250 V 1.1 or 1.01 - OHCF size conflict. | | Versão: | Data: 11-08-2008 | Tamanho: 1,5MB | Idioma: Português | | Paper size and orientation conflicts with SRA3 Heavyweight 1
using tray 5 with an Oversize High Capacity Feeder (OHCF). | | Nota para o: Release notes and installation instructions are included with the file. | | Aviso: Prerequisites: EXP250 v1.1 or EXP250 v1.01 |
|
| |
|
|
| | > 1-U5OLI Patch for EXP250 V 1.1 or 1.01 - Print PPML files | | Versão: | Data: 08-08-2008 | Tamanho: 1,1MB | Idioma: Português | | This patch will allow the printing of files in PPML format. | | Aviso: PREREQUISITE: Command WorkStation 4.6.0.30 or higher must be installed prior to installing this software and Fiery system software must be at version 1.1 or 1.01. |
|
| |
|
|
| | > Custom 2 Booklet Patch | | Versão: | Data: 11-07-2008 | Tamanho: 194,7KB | Idioma: Português | | This patch fixes the issues of custom sizes from tray 6 are not printing to the Booklet tray and the stacker tray cannot be set using virtual printer and custom paper sizes. | | Nota para o: Please read the installation instructions prior to installing the patch. | | Aviso: Prerequisite(s): The CX250 must be at version 1.1_SP2 prior to performing this install. |
| |
| |
|
|
| | > v1.2 Patch (1-XYPPP) for DocuColor 240-250 bustled Fiery Color Server | | Versão: | Data: 10-07-2008 | Tamanho: 639,8KB | Idioma: Português | | This patch fixes the issue of erroneous lines being printed on the output when using tray alignment.
| | Nota para o: Installation instructions and Customer Letter are included with the patch file. | | Aviso: PREREQUISITE(S): Install only onto Fierys with 1.2 system software and patch 1-XVE1A. You may corrupt the software if the prerequsites are not followed.
See Install Instructions for details. |
| |
| |
|
|
| | > 1-SS6CZ Patch for EXP250 V 1.1 or 1.01 - Inserting special pages causing incorrect output. | | Versão: | Data: 02-07-2008 | Tamanho: 1,5MB | Idioma: Português | | Inserting special pages into a print job from a different tray can cause stapled output to be broken into incorrect sets. | | Nota para o: Installation instructions and Customer Letter are included with the patch file. | | Aviso: PREREQUISITE(S): -RoHS systems must be at version 1.1 prior to installing this software. -Non-RoHS systems must be at version 1.01 prior to installing this software |
|
| |
|
|
| | > v1.2 Patch (1-XVE1A) - Rotated images from InDesign CS3 from a Mac | | Versão: 1 | Data: 02-07-2008 | Tamanho: 1,1MB | Idioma: Português | | This patch will fix an issue that landscape jobs, printed from a Macintosh using InDesign CS3 will print rotated 90 degrees starting with page 2. | | Nota para o: Installation instructions and Customer Letter are included with the patch file. | | Aviso: Install only onto Fierys with 1.2 system software.
This patch is a prerequsite for most 1.2 patches. Always read the installation instructions. |
| |
| |
|
|
| | > 1-UKTCR Patch for EXP250 V 1.1 or 1.01 - Image rotated 90 degrees. | | Versão: | Data: 28-05-2008 | Tamanho: 1,6MB | Idioma: Português | | Fixes an issue when printing from a Mac with either Illustrator CS3 or InDesign CS3. Images are rotated 90 degrees. | | Nota para o: Installation instructions and Customer Letter are included with the patch file. | | Aviso: PREREQUISITE(S): -RoHS systems must be at version 1.1 prior to installing this software. -Non-RoHS systems must be at version 1.01 prior to installing this software. |
|
| |
|
|
| | > 1-TEW3C Patch for EXP250 V 1.1 or 1.01 - Scale to fit and TIFF files. | | Versão: | Data: 15-05-2008 | Tamanho: 10,5MB | Idioma: Português | | Patch to fix the scale to filt option so it works with TIFF files. | | Nota para o: Installation instructions and Customer Letter are included with the patch file. | | Aviso: PREREQUISITE(S):
-RoHS systems must be at version 1.1 prior to installing this software.
-Non-RoHS systems must be at version 1.01 prior to installing this software. |
|
| |
|
|
| | > 1-WUBU9 Patch for EXP250 V 1.1 or 1.01 -Update Acrobat version patch. | | Versão: | Data: 13-05-2008 | Tamanho: 1,4MB | Idioma: Português | | Fixes the issue that Adobe Acrobat 8 cannot be updated if this application is installed on the Fiery server. This patch is for the DocuColor 240/250 with the EXP260 v 1.1 or 1.01 (External Fiery Controller). | | Nota para o: Notes and installation instructions are included with the file. | | Aviso: Prerequisite(s):
RoHS systems must be at version 1.1 prior to installing this software
Non-RoHS systems must be at version 1.01 prior to installing this software. |
|
| |
|
|
| | > Splash RPX-ii Imposition Patch 4-24-08 | | Versão: | Data: 07-05-2008 | Tamanho: 610,3KB | Idioma: Português | | Patch to fix the issue of a virtual printer, with impositon, produces blank output with Adobe Acrobat Professional 8 on Mac-Intel. | | Nota para o: Prerequsite: Your system must be at version Splash RPX-ii v 2.0 or higher.
Installation notes and customer letter are included with the patch file. | |
| |
|
|
| | > 1-VNJI2 Patch for EXP240/250 | | Versão: | Data: 19-03-2008 | Tamanho: 9,6MB | Idioma: Português | | Contains Multiple patches relating to imposition and PDF files. Please see the included release notes for full details. | | Nota para o: Prerequisites: EXP250 v1.1 or EXP250 v1.01 | |
| |
|
|
| | > HF-Spot Patch, for CX240/250 | | Versão: | Data: 04-03-2008 | Tamanho: 3,1MB | Idioma: Português | | Fix for: Prinergy PDF files sent to Hot Folders are not deleted after being printed. | | Nota para o: Please see the included Customer Letter and Release Notes for install ation instructions. | | Aviso: Prerequsite is Spire Color Server V1.1_SP2 |
| |
| |
|
|
| | > 1-V4KEJ Patch for EXP240/250 | | Versão: | Data: 03-03-2008 | Tamanho: 2,2MB | Idioma: Português | | Job stuck in waiting state with no error message to indicate a media problem. | | Nota para o: Prerequisites: EXP250 v1.1 or EXP250 v1.01
NOTE: Customer Letter and Release Notes modified March 18, 2008 | |
| |
|
|
| | > 1-UIV27 Patch for RPX-ii v2.0.4 and DC240/250 | | Versão: | Data: 29-02-2008 | Tamanho: 297,7KB | Idioma: Português | | Large files with Image Shift caused Fiery to reboot. The file will process, go to Print Pending on Splash, and then the "Check Power Cable" error message will be displayed on the Splash Server. | | Nota para o: Install only on Splash Server version 2.0.4 |
| |
|
|
| | > Tray6 Patch | | Versão: | Data: 22-02-2008 | Tamanho: 1,9MB | Idioma: Português | | Please read the Customer Letter-Release Notes for installation details. Items resolved include: Tray 6 out of place after Sleep mode, Unable to print 12x18 or 13x19 jobs from tray 6 following install of SP2, and Cannot print several booklets at the same time. | | Nota para o: This patch supersedes the previously released 12x18-Booklet_Patch. | | Aviso: Prerequsite is Spire Color Server V1.1_SP2 |
| |
| |
|
|
| | > CX250 PDF Library 7.0.7 patch | | Versão: | Data: 22-12-2007 | Tamanho: 10,3MB | Idioma: Português | | This patch is addressing problems of font missing and handling with Adobe PDF Library 7. | | Nota para o: This patch should be installed on top of CX250 version 1.1_SP2 only.
It does not include any previously released patches and does not conflict with any. See the Release Notes / Technical Bulletin for installation instructions. | | Aviso: Prerequsite is Spire Color Server V1.1_SP2 |
| |
| |
|
|
| | > Spire CX250 Color Server V 1.1-SP2 | | Versão: | Data: 22-12-2007 | Tamanho: 380,5MB | Idioma: Português | | This Service Pack is the latest version of the Spire CX250 Color Server for the Xerox DocuColor 240/250 printer-copier. It includes all previous fixes and patches, see release notes for details. The release notes are not included in the zip file. | | Nota para o: The Spire CX250 color server version 1.1 Service Pack 2 software provides consistent performance across platforms. The Spire CX250 color server version 1.1 Service Pack 2 software runs on both the RoHS and non-
RoHS platforms, and includes all previous service packs and patches.
See the release notes for details. | |
| |
|
|
|
|
|
|
| | > Imposition Updates Patch, Release 05-01-07 | | Versão: 5-1-07 | Data: 01-05-2007 | Tamanho: 611,4KB | Idioma: Português | | This update is for RPX-i, GP5065, G640, G3535, and G630. It adds updates to support Quark Xpress 7.1 on Mac and Windows and Acrobat 8 on Mac and Windows. | | Nota para o: Details are in the release notes which are included with the download. | |
| |
|
|
| | > 1.2.2 Upgrade Patch for Splash RPX-1 | | Versão: | Data: 15-02-2007 | Tamanho: 100,6MB | Idioma: Português | | Provides a native Intel Macintosh RIP and contains fixes for some problems with the RPX-i v 1.2.1 software. | | Nota para o: Version 1.2.2 may be installed over any Splash RPX-i release version 1.1 or later. It is not necessary to install any other updates before installing v.1.2.2.
This patch is normally installed using Splash server auto-update option. Instructions for installing the patch manually are in the release notes. | |
| |
|
|
| | > 2007 Daylight Savings Time (Patch # 1-QZXUG) | | Versão: | Data: 19-01-2007 | Tamanho: 613,0KB | Idioma: Português | | Patch to update the 2007 Time zone chages for the Microsoft Operating Systems of the following Xerox products: EXP250 ver. 1.1 and 1.01, EX3535 1.0, EX12 XPe 3.0, X12 XPe 2.0, XP12 XPe 2.0, EX7750 1.0 | | Nota para o: The release notes with installation instructions are included in the zipped file.
This patch is also available through the System Update or Check for Product updates section of Web Tools. | |
| |
|
|
|
|
|
|
|
|
| | > Prevent Mailbox Corruption (Patch 1-OQIAF) | | Versão: | Data: 25-08-2006 | Tamanho: 73,7KB | Idioma: Português | | Patch for Docucolor 240/250 with built-in Fiery controller. This patch will prevent the mailboxes / templates from corrupting and failing to function correctly. Failures may include 27-741, 016-781 and 061-782 when scanning. | | Nota para o: If mailboxes are currently corrupted, the Fiery software will need to be reloaded and this patch applied before rebuilding the mailboxes.
Installation instructions and release notes are included with this file. | |
| |
|
|
| | > Prevent Mailbox Corruption (Patch 1-OQIB9) | | Versão: | Data: 25-08-2006 | Tamanho: 1,1MB | Idioma: Português | | Patch for the DocuColor 240/'250 with External Fiery controler version 1.01 or 1.1. This patch will prevent the mailboxes / templates from corrupting and failing to function correctly. Failures may include 27-741, 016-781 and 061-782 error codes when scanning. | | Nota para o: Installation instructions and release notes are included with this file. | |
| |
|
|
|
|
| | > Error code 045-314 (Patch # 1-MXZ4X) | | Versão: | Data: 01-05-2006 | Tamanho: 184,0KB | Idioma: Português | | Fixes only error codes 045-314 which is related to the output destination of the printer. |
| |
|
|
|
|
| | > NDS browsing fix. (Patch # 1-IY4ZU) | | Versão: | Data: 01-05-2006 | Tamanho: 38,9KB | Idioma: Português | | Cannot browse NDS trees and context, and therefore cannot successfully enable Pserver
| |
| |
|
|
| | > Version 1.1 of Fiery Network Controller for DocuColor 240/250 | | Versão: | Data: 01-05-2006 | Tamanho: 551,2MB | Idioma: Português | | This file will upgrade the Fiery Network Controller for a bustled DC240/250 to version 1.1 | | Nota para o: To find the current version of the Fiery Network Controller push the following buttons on the user interface to print a Configuration report.
Machine Status > Billing Meter/Print Report > Print Report/List > Network Controller Jobs Report > Systerm Settings List > Start
Look at the Server Info section for the Version #. | |
| |
|
|
|
|
|
|
| | > Enable/Disable the Remote Destop (Patch 1-E4VH1) | | Versão: | Data: 01-01-2005 | Tamanho: 594,5KB | Idioma: Português | | This patch will enable and/or disable Remote Desktop for non-FACI EXP250 (The configuration with the Fiery tower only, no keyboard and monitor). | | Aviso: Please read and understand all documentation included with this patch before installing it. |
|
| |
|
|
|
Email this page
> 